Shandong Luming New Materials Technology Co., Ltd. is one of the leading manufacturers and suppliers of fused silica brick in China. We have world-leading production equipment and strong manufacturing capabilities. Please feel free to buy premium fused silica brick at competitive price from our factory.
Fused silica brick is a high-performance refractory material primarily composed of high-purity silica (SiO₂), manufactured through an electric arc furnace melting process.It is alumina silicate refractory brick.Fused silica bricks mainly consist of tridymite, cristobalite, and a small amount of glassy phase. The electric fusion process creates a more complete crystal structure with large, uniform grains, reducing grain boundary defects and improving overall performance. They are classified as acidic refractory materials.Due to their melting process, they have a denser structure, higher mechanical strength, and superior corrosion resistance.
Manufacturing Process
The production process of fused silica refractory bricks includes the following steps:
Raw Material Preparation
The main raw material is high-purity quartz sand, Small amounts of mineralizers are added to promote the formation of tridymite and cristobalite, enhancing high-temperature performance.
01
Electro-fusion
High-purity quartz sand is melted at high temperatures in an electric arc furnace, turning it into amorphous fused silica. This process ensures the material's high purity and uniformity.
02
Casting
The molten silica liquid is poured into pre-prepared molds to form bricks of specific shapes.
03
Cooling and Solidification
Controlled cooling is applied to avoid stress concentration, typically followed by an annealing process to ensure structural stability.
04
Processing and Inspection
The bricks are cut and polished to standard or customized sizes.Physical and chemical properties are tested to ensure compliance with standards and requirements,
05
Technical Data of Fused Silica Brick
|
Item |
Standard Fused Silica Brick |
Dense type Fused Silica Brick |
High-Purity Fused Silica Brick |
|
Chemical Composition (%) |
|||
|
SiO₂ |
≥98.5 |
≥99.0 |
≥99.5 |
|
Al₂O₃ |
≤0.5 |
≤0.3 |
≤0.1 |
|
Fe₂O₃ |
≤0.3 |
≤0.2 |
≤0.05 |
|
Physical Properties |
|||
|
Bulk Density (g/cm³) |
≥ 2.15 |
≥ 2.32 |
≥ 2.2 |
|
Apparent Porosity (%) |
≤ 20 |
≤ 10 |
≤ 15 |
|
Cold Crushing Strength (MPa) |
≥ 30 |
≥ 50 |
≥ 40 |
|
Refractoriness(°C) |
≥1750 |
≥1760 |
≥1770 |
|
Refractoriness Under Load (0.2MPa) ,(°C) |
≥ 1650 |
≥1670 |
≥ 1680 |
|
Reheating Linear Change (1500°C, 2h) (%) |
±0.3 |
±0.2 |
±0.2 |
|
Thermal Expansion Coefficient (1000°C),(×10⁻⁶/°C) |
0.5-0.6 |
0.4-0.5 |
0.3-0.5 |
|
Thermal Conductivity (1000°C, W/(m·K)) |
1.2-1.5 |
1.3-1.6 |
1.1-1.4 |
|
Maximum Service Temperature (°C) |
≤1600 |
≤1650 |
≤1650 |


Size: 230x114x65mm, 300x300x150mm, 400x400x200mm.
As per customers' requirements to do.
Performance Characteristics
Electrofusion silica bricks exhibit the following key performance characteristics:
High Refractoriness: Refractoriness is close to the melting points of tridymite (1670°C) and cristobalite (1713°C), typically ranging from 1640°C to 1680°C, suitable for high-temperature environments.
High-Temperature Resistance: The Load Softening Temperature is 1650-1680°C, long-term service temperature up to 1650°C.
Excellent Acid Corrosion Resistance: Highly resistant to acidic slags , making them ideal for acidic environments.
Low Porosity and High Density: The fusion process results in a dense structure with low porosity and high bulk density providing excellent wear resistance and corrosion resistance.
Extremely Low Thermal Expansion Coefficient: This is one of the most significant characteristics of fused silica brick. At high temperatures, its volume change is minimal, almost negligible, hence its name "zero-expansion silica brick." This gives it excellent thermal shock stability in environments with drastic temperature fluctuations, making it resistant to cracking or deformation.
Outstanding Thermal Shock Resistance: Due to its extremely low thermal expansion coefficient, fused silica brick can withstand rapid heating and cooling cycles without thermal stress cracking, which is crucial for furnace components that require frequent temperature changes.
High Purity: It typically contains over 98% SiO₂, with very low impurity content. This provides it with good corrosion resistance, especially strong resistance to acidic slag and molten metal erosion.
High Temperature Strength and Creep Resistance: It maintains high mechanical strength and dimensional stability at high temperatures, with excellent creep resistance, making it unlikely to soften or deform. Its refractoriness under load usually starts above 1650°C.
Low Thermal Conductivity: This aids in insulation, reduces heat loss, and improves energy efficiency.
Non-contaminating: Due to its high purity, it minimally contaminates molten materials (such as molten glass or aluminum) it comes into contact with during use. This is very important for industries producing high-quality products.
Strong Formability: It can be precision cast or processed into bricks of various complex shapes and sizes to meet the specific requirements of different furnace types.
Main Applications
Due to their excellent high-temperature performance and corrosion resistance, fused silicon bricks are widely used in the following industrial applications:
1.Coke Ovens: Used in critical areas such as such as the regenerator wall, inclined flue, combustion chamber, carbonization chamber, ,oven top,standpipe and the hot repair of coke ovens, accounting for 60% to 70% of the total refractory materials in the coke oven. Its high quality directly affects the service life of the coke oven (typically 20 to 45 years).
2.Glass Industry: It's a critical refractory material for glass melting furnaces, especially suitable for key parts such as the tank walls, throat, forehearth, crown, arch,and breast walls. Its excellent resistance to molten glass erosion and thermal shock stability significantly extend the lifespan of glass furnaces.
3.Non-ferrous Metal Smelting: Particularly in the aluminum smelting industry, it's used in areas that come into contact with molten aluminum, such as aluminum troughs and molten aluminum gates. Its high purity and corrosion resistance effectively prevent aluminum contamination.
4.Acidic Steel-Making Furnaces: Used in the furnace roofs or linings of acidic open-hearth furnaces to resist acidic slag corrosion.
5.Hot Blast Furnaces and Soaking Furnaces:Utilized in high-temperature zones of hot blast furnaces and soaking furnaces for ironmaking, meeting requirements for high strength and refractoriness.
6.Ceramic Industry: Used in critical parts of high-temperature kilns.
7.Chemical Industry: Acid-resistant reaction vessels and pipeline linings.
8.Electronics: High-temperature components in semiconductor manufacturing.
9.Aerospace: Rocket nozzles and thermal protection materials.
10.Chemical and Enamel Industries: Used for kiln or equipment linings that need to withstand high temperatures, thermal shock, and corrosive media.
Packaging and Shipping Fused Silica Brick
1.Packed on wooden pallets with moisture-proof film to prevent damage.
2.Wooden box
3.Keep in dry, ventilated areas.
Our Company




Why Choose Us?
We are a modern integrated enterprise specializing in refractory materials, combining R&D, production, design, construction and technical services. Our business covers development, manufacturing and sales of refractory materials and insulation material
Our engineers will recommend right bricks for you based on:
Operating temperature → Determines Al₂O₃ content
Chemical environment → Corrosion resistance grade
Mechanical load → Density & strength requirements
Free samples to be provided.
Within in 8 hours to respond your inquiry.
If you receive defective products, We guarantee: 24-hour response, Solution within 48 hours and Replacement/refund options.
Our company supplies a complete range and type of Refractory materials, including:
Standard to high-grade products (Al2O3: 48%-90%)
Special-function types (spalling-resistant, low-creep, microporous, etc.)
Custom-engineered solutions for specific applications
Hot Tags: fused silica brick, China fused silica brick manufacturers, suppliers, factory, Semi-silica Brick, Silica Refractory Brick, Sintered Silicon Bricks, Fused Silica Brick, silica brick, Silica Mullite Brick
