Shandong Luming New Materials Technology Co., Ltd. is one of the leading manufacturers and suppliers of sintered corundum brick in China. We have world-leading production equipment and strong manufacturing capabilities. Please feel free to buy premium sintered corundum brick at competitive price from our factory.
Sintered Corundum Brick is refractory materials primarily made from high-purity alumina (Al₂O₃) and fired at high temperatures. They exhibit excellent high-temperature resistance, mechanical strength, and chemical stability.Its Primary Raw Materials is High-Purity Alumina( Industrial alumina, calcined alumina, or fused alumina, with Al₂O₃ content typically ranging from 95% to 99.5%.)and Additives (Small amounts of clay, magnesia (MgO), chromium oxide (Cr₂O₃), or other additives to improve sintering properties or enhance specific performance.) Below is details:
Technical Data of Corundum Fire Brick
|
Item |
Corundum refractory brick |
||
|
C-99 |
C-95 |
C-90 |
|
|
Al2O3, ≥% |
99 |
95 |
90 |
|
Fe2O3, ≤% |
0.1 |
0.6 |
0.8 |
|
SiO₂, ≤% |
0.3 |
3 |
6 |
|
Na₂O + K₂O (%),≤% |
0.2 |
0.3 |
0.5 |
|
CaO + MgO,≤% |
0.2 |
0.3 |
0.5 |
|
Bulk Density, ≥g/cm³ |
3.2-3.6 |
3.2-3.6 |
3.2-3.6 |
|
Apparent Porosity ,≤% |
16 |
18 |
20 |
|
Cold crushing strength, ≥Mpa |
100 |
100 |
100 |
|
0.2Mpa Refractoriness under load, ≥℃ |
1700 |
1700 |
1700 |
|
Item |
Resintering AZS brick |
||
|
AZS-16 |
AZS-20 |
AZS-32 |
|
|
ZrO2, ≥% |
16 |
20 |
32 |
|
Fe2O3, ≤% |
0.5 |
0.5 |
0.5 |
|
Bulk Density, ≥g/cm³ |
2.7 |
2.85 |
3.1 |
|
Apparent Porosity ,≤% |
18 |
18 |
18 |
|
Compressive strength, ≥Mpa |
70 |
80 |
80 |
|
0.2Mpa Refractoriness under load, ≥℃ |
1580 |
1630 |
1630 |



Performance Characteristics
Due to their high purity and dense structure,High-Purity Alumina Brick exhibit the following excellent properties:
High Refractoriness: Pure corundum has a melting point of up to 2050℃, and sintered corundum bricks typically have a refractoriness greater than 1790℃, or even higher, capable of withstanding extremely high operating temperatures.uitable for long-term use above 1700oC.
High Refractoriness Under Load: They maintain structural stability under high-temperature loads and are resistant to deformation.
High Strength: Possess high compressive strength (>100 MPa)and flexural strength at both room and high temperatures, providing strong resistance to mechanical stress.
Good Corrosion Resistance: Exhibit good resistance to corrosion from molten slag, molten metals, and molten glass, especially against acidic and neutral slags.
Excellent Wear Resistance: Dense texture with good intergranular bonding, providing outstanding wear resistance.
Good Thermal Shock Stability: capable of withstanding rapid thermal cycling.
Low Porosity and High Bulk Density: Thoroughly sintered, with few and uniformly distributed intergranular pores, resulting in high bulk density, which helps improve strength and corrosion resistance.
Low Thermal Conductivity: Compared to fused corundum bricks, sintered corundum bricks have lower thermal conductivity, offering better insulation properties.
Chemical Stability: Does not easily react chemically with various media at high temperatures.
High Purity: Usually made from high-purity alumina raw materials, ensuring high product purity.
Dense Structure: After high-temperature sintering, a dense corundum crystal structure with good intergranular bonding and low porosity is formed.
Uses
Corundum firebrick, with their outstanding high-temperature performance and long service life, provide crucial support for the stable operation of high-temperature industries.
1.Metallurgical Industry:
1.)Linings for steelmaking electric furnaces, converters, and ladles, especially for ladle working linings and permeable bricks (requiring good permeability, corrosion resistance, and thermal shock resistance).
2).Linings for continuous casting tundishes.
3).Heating furnaces, heat treatment furnaces, etc.
4).Blast furnace hot blast stoves and molten iron pretreatment equipment.
2.Non-ferrous Metals Industry: Smelting furnaces for copper, aluminum, zinc, and other non-ferrous metals.electrolytic cells.
3.Glass Industry:Key parts of glass melting furnaces, such as tank walls, tank bottoms, throat,and feeder channels, due to their good resistance to glass melt corrosion.
4.Petrochemical Industry:
1).Refractory linings for petrochemical cracking furnaces and ammonia synthesis converters, and carbon black reactors.
2).Corrosion-resistant areas in waste incinerators and gasifiers.
5.Ceramic Industry:Linings for ceramic firing kilns and tunnel kilns.
6.Building Materials: Cement kiln transition zones, lime kilns.
7.High-temperature combustion chambers, waste incinerators, industrial boilers, High-temperature experimental furnaces and aerospace material sintering furnaces,etc.
Packaging and Shipping of Sintered Corundum Brickis
1.Packed on wooden pallets with moisture-proof film to prevent damage.
2.Packed on wooden box.
3.Keep in dry, ventilated areas.
Our Company




FAQ
Hot Tags: sintered corundum brick, China sintered corundum brick manufacturers, suppliers, factory, Fused Corundum Brick, Zirconia-corundum Brick, corundum brick, Refractory Corundum Brick, Chrome-corundum Brick, Sintered Corundum Brick
