Shandong Luming New Materials Technology Co., Ltd. is one of the leading manufacturers and suppliers of unshaped refractory materials in China. We have world-leading production equipment and strong manufacturing capabilities. Please feel free to buy premium unshaped refractory materials at competitive price from our factory.
Unshaped Refractory Materials, also known as bulk or integral refractories, these are non-fired, loose, and pre-mixed materials supplied for on-site application. They are used to directly form a furnace's inner lining or specific refractory shapes through various installation methods like casting, ramming, gunning, or troweling. They are mainly composed of refractory aggregates, powders, and binders mixed in specific proportions and particle sizes. Compared to traditional refractory bricks, the key difference is their lack of a fixed shape. They don't require complex forming and firing processes, which makes them easier to transport. They can be formed into any desired seamless monolithic structure on-site, offering easier installation, better thermal shock resistance, improved integrity, and are more energy-efficient and environmentally friendly.
Main Classifications and Characteristics
Based on construction methods and hardening characteristics, unshaped refractory materials are mainly divided into the following categories:
Refractory Castable
The most widely used type. Supplied as dry mixes, they become fluid after mixing with water or liquid binders and can be constructed by pouring.Convenient construction, can be used to create complex shapes, good integrity.
01
Refractory Plastics
Paste-like or cake-like, plastic. Constructed by ramming with tools.Low room temperature strength, but good medium and high temperature strength, excellent thermal shock stability. Often used in blast furnace shafts, heating furnace roofs, etc.
02
Refractory Ramming Mixes
Dry or semi-dry loose state, constructed by strong ramming. Binder content is usually lower than in plastics.High density, high strength. Often used in induction furnace linings, blast furnace troughs, and other areas subject to severe impact and wear.
03
Refractory Gunning Mixes
Sprayed onto the construction surface at high speed through a spraying machine. Divided into wet process (pre-mixed with water before spraying) and dry process (dry mix combined with water at the nozzle during spraying). High construction efficiency, suitable for lining repair, construction, and spray-on protective layers.
04
Refractory Coatings/Mortars
Paste or slurry-like, applied by hand or trowel. Typically used to make protective coatings or as joint material (refractory mortar) for laying refractory bricks.
05


1.Rotary Kiln and Auxiliary Equipment
Castable refractories and prefabricated blocks for the bodies of lime and calcined dolomite rotary kilns:
|
Item Mark No. |
LM-GM75 |
LM-GM70 |
LM-GM65 |
LM-M60 |
Precast block, castable LM-MA90 |
Precast block, castable LM-MA95 |
|
|
AL2O3(+MgO) % ≥ |
75 |
70 |
65 |
60 |
90 |
95 |
|
|
Bulk Density, (g/m3)±0.05 |
2.75 |
2.70 |
2.60 |
2.50 |
3.15 |
2.95 |
|
|
Compressive Strength(MPa)≥ |
110℃X24h |
80 |
80 |
70 |
60 |
50 |
50 |
|
1350℃X3h |
120 |
110 |
90 |
80 |
1500℃x3h, 80 |
||
|
Modulus of Rupture(MPa)≥ |
110℃X24h |
10 |
9 |
8 |
8 |
6 |
6 |
|
1350℃X3h |
14 |
12 |
10 |
10 |
1500℃x3h, 12 |
||
|
Refractoriness under load ,0.2MPa,T2.0/℃ |
1600 |
1550 |
1450 |
1400 |
≥1700 |
T0.6/℃≥1700 |
|
|
linear change rate, 1350℃x3h,%, ± |
0.5 |
0.5 |
0.5 |
0.5 |
(1450℃x3h) +0.6 |
||
|
Service Environment |
Calcination Zones for: Active Lime with Raw Burn Ratio ≥3%, Light-burned Dolomite |
Active lime calcination zone with raw burn ratio ≥5%; Combustion burner; Light-burned dolomite calcination zone; Cement kiln precalciner stage II |
Low-temperature section of active lime kilns, preheaters, etc;Cement kiln pre-decomposition stage I,Kiln hood, cooler, etc. |
kiln hood , kiln outlet hood, Preheater, Cooler,etc of Lime kiln and Cement kiln |
Active lime underburning rate ≤3% calcination zone; Cement kiln front and rear transition zones |
Calcination zone and transition zone of cement kiln; Calcination zone of lime kiln with ≤3% underburned ratio |
|
Preheater, cooler, smoke chamber, transfer chute, kiln hood and other parts use unshaped refractory materials.(The castable refractory material may incorporate 2-3% heat-resistant steel fibers based on the service environment and temperature requirements)
|
Item Mark No. |
LM-D70 |
LM-D65 |
LM-D60 |
LM-D50 |
LM-DN40 |
LM-DN30 |
|
|
AL2O3 % ≥ |
70 |
65 |
60 |
50 |
40 |
30 |
|
|
Bulk Density(g/m3) |
2.70 |
2.60 |
2.50 |
2.40 |
2.2 |
2.0 |
|
|
Compressive Strength(MPa)≥ |
110℃X24h |
80 |
60 |
50 |
50 |
40 |
40 |
|
1100℃X3h |
90 |
70 |
70 |
60 |
60 |
50 |
|
|
Modulus of Rupture(MPa)≥ |
110℃X24h |
10 |
8 |
8 |
6 |
6 |
6 |
|
1100℃X3h |
14 |
12 |
10 |
8 |
8 |
(850℃x3h) 6 |
|
|
linear change rate 1300℃x3h,% ± |
0.3 |
0.5 |
0.5 |
(1100℃x3h)±0.5 |
(1100℃x3h) ±0.5 |
(850℃x3h) ±0.5 |
|
Refractory castables and precast shapes for high-temperature alumina, needle coke rotary kilns, secondary combustion chambers, etc.:
|
Item Mark No. |
LM-GM80 |
LM-GM75 |
LM-M70 |
LM-M65 |
LM-D50 |
LM-D45 |
|
|
AL2O3 % ≥ |
78 |
73 |
68 |
60 |
50 |
45 |
|
|
Bulk Density,(g/m3) |
2.80 |
2.70 |
2.65 |
2.55 |
2.35 |
2.30 |
|
|
Compressive Strength(MPa)≥ |
110℃X24h |
40 |
50 |
50 |
60 |
40 |
40 |
|
1100℃X3h/1300℃X3h |
80/100 |
70/120 |
70/100 |
90/100 |
60/ |
60/ |
|
|
1500℃X3h |
120 |
120 |
100 |
/ |
/ |
/ |
|
|
Modulus of Rupture(MPa)≥ |
110℃X24h |
6 |
8 |
8 |
6 |
6 |
6 |
|
1100℃X3h |
10 |
10 |
12 |
10 |
8 |
8 |
|
|
1500℃X3h |
14 |
14 |
14 |
/ |
/ |
/ |
|
|
Linear change rate ,1300℃x3h,% ± |
0.3 |
0.5 |
0.5 |
0.5 |
0.5 |
0.5 |
|
|
Continuous Service Temperature, ℃ |
1550 |
1500 |
1450 |
1400 |
1350 |
Acid and Alkali Resistant 1300 |
|
General roasting rotary kiln:
Pyrometallurgical alumina ; Alumina extraction from high-alumina coal fly ash; Reduction roasting of limonite,siderite:
|
Item Mark No. |
LM-MA85 |
LM-GN15 |
LM-MS65 |
LM-MS45 |
LM-D35 |
|
|
AL2O3 % ≥ |
70 |
45 |
60 |
40 |
30 |
|
|
MgO(SiC) % ≥ |
15 |
/ |
(8) |
(8) |
||
|
Bulk Density(g/m3) |
2.85 |
2.30 |
2.55 |
2.40 |
2.20 |
|
|
Apparent Porosity % ≤ |
15 |
15 |
||||
|
Compressive Strength(MPa)≥ |
110℃X24h |
60 |
50 |
60 |
50 |
40 |
|
1100℃X3h |
80 |
70 |
60 |
60 |
||
|
1350℃X3h |
80 |
90 |
/ |
/ |
||
|
Modulus of Rupture(MPa)≥ |
110℃X24h |
6 |
8 |
8 |
6 |
6 |
|
1100℃X3h |
10 |
10 |
10 |
8 |
||
|
1350℃X3h |
12 |
12 |
/ |
/ |
||
|
Linear change rate, 1350℃x3h, % ± |
0.5 |
0.3 |
0.5 |
0.5 |
0.5 |
|
|
Operating environment and application range |
Rotary kiln for pyrometallurgical alumina calcination; Calcination section of the rotary kiln for alumina extraction from high-alumina fly ash |
Calcination Section of Pyrometallurgical Alumina Rotary Kiln; Low-temperature section for alumina extraction from high-alumina fly ash. |
Calcining zone of rotary kiln for reduction roasting of limonite, siderite, and pyrite |
Low-temperature zone of the rotary kiln for reduction and roasting of limonite, siderite, and pyrite |
kiln hood of a rotary kiln used for the reduction and roasting of limonite, siderite, and pyrite |
|
Rotary Kiln for Ferroalloy and Non-Ferrous Metallurgy:
Ferrochrome reduction, ferronickel pre-reduction, direct reduction, ferromanganese decomposition, ferrovanadium reduction:
|
Item Mark No. |
LM-GMC75 |
LM-GMA90 |
LM-M70 |
LM-M65 |
LM-D50 |
|
|
AL2O3 % ≥ |
72 |
68 |
68 |
60 |
50 |
|
|
Cr2O3/MgO % ≥ |
3/ |
/20 |
/ |
/ |
/ |
|
|
Bulk Density(g/m3)±0.1 |
2.75 |
3.0 |
2.70 |
2.55 |
2.35 |
|
|
Compressive Strength(MPa)≥ |
110℃X24h |
40 |
50 |
50 |
60 |
40 |
|
1100℃X3h/ 1300℃X3h |
80/100 |
70/120 |
70/100 |
90/100 |
60/ |
|
|
1500℃X3h |
120 |
120 |
/ |
/ |
/ |
|
|
Modulus of Rupture(MPa)≥ |
110℃X24h |
6 |
8 |
8 |
6 |
6 |
|
1100℃X3h |
10 |
10 |
12 |
10 |
8 |
|
|
1500℃X3h |
14 |
14 |
14 |
/ |
/ |
|
|
linear change rate, 1300℃x3h,% ± |
0.3 |
0.5 |
0.5 |
0.5 |
0.5 |
|
|
Continuous Service Temperature ℃ |
1500 |
1600 |
1450 |
1400 |
1350 |
|
|
Service Environment |
Ferrochrome Reduction Kiln;Sponge Iron Rotary Kiln |
Ferronickel Direct Reduction Rotary Kiln |
High- Temperature Zone of Ferronickel Pre-reduction Rotary Kiln; Ferromanganese Decomposition Kiln |
Ferromanganese Decomposition Kiln; Low-Temperature Zone of Ferronickel Pre-Reduction Kiln |
Vanadium Pentoxide Rotary Kiln |
|
New Energy and Chemical Rotary Kiln:
Lithium Salt and Strontium Salt Rotary Kiln;Barium Sulfide and Barium Oxide Rotary Kiln; Titanium Dioxide Rotary Kiln:
|
Item Mark No. |
LM-GM75 |
LM-M70 |
LM-M65 |
LM-D60 |
LM-D45 |
|
|
AL2O3 ,% ≥ |
75 |
68 |
65 |
60 |
45 |
|
|
Bulk Density (g/m3)±0.1 |
2.75 |
2.70 |
2.55 |
2.50 |
2.35 |
|
|
Compressive Strength(MPa)≥ |
110℃X24h |
70 |
70 |
60 |
50 |
40 |
|
1100℃X3h |
80 |
70 |
80 |
70 |
60 |
|
|
1350℃X3h |
120 |
100 |
100 |
/ |
/ |
|
|
Modulus of Rupture(MPa)≥ |
110℃X24h |
8 |
8 |
6 |
6 |
6 |
|
1100℃X3h |
10 |
12 |
10 |
8 |
8 |
|
|
1350℃X3h |
14 |
14 |
12 |
/ |
/ |
|
|
Linear change rate, 1350℃x3h, % , ± |
0.5 |
0.5 |
0.5 |
0.5 |
0.5 |
|
|
Service Environment |
Lithium Hydroxide, Lithium Carbonate, Lithium Chloride and Other Lithium Salts Rotary Kiln |
Rotary Kiln for Strontium Carbonate, Strontium Hydroxide, Barium Sulfide, etc |
Low-Temperature Section of Rotary Kiln for Lithium Salts, Strontium Salts, Barium Salts, etc |
Rotary kiln kiln hoods, smoke chambers, and other components for various acid, alkali, and salt production |
Areas with temperatures below 1100℃ exhibiting excellent acid and alkali resistance |
|
Rotary Kiln for Ferroalloy and Non-Ferrous Metallurgy:
Ferrochrome reduction, ferronickel pre-reduction, direct reduction, ferromanganese decomposition, ferrovanadium reduction:
|
Item Mark No. |
LM-GMC75 |
LM-GMA90 |
LM-M70 |
LM-M65 |
LM-D50 |
|
|
AL2O3 % ≥ |
72 |
68 |
68 |
60 |
50 |
|
|
Cr2O3/MgO % ≥ |
3/ |
/20 |
/ |
/ |
/ |
|
|
Bulk Density(g/m3)±0.1 |
2.75 |
3.0 |
2.70 |
2.55 |
2.35 |
|
|
Compressive Strength(MPa)≥ |
110℃X24h |
40 |
50 |
50 |
60 |
40 |
|
1100℃X3h/ 1300℃X3h |
80/100 |
70/120 |
70/100 |
90/100 |
60/ |
|
|
1500℃X3h |
120 |
120 |
/ |
/ |
/ |
|
|
Modulus of Rupture(MPa)≥ |
110℃X24h |
6 |
8 |
8 |
6 |
6 |
|
1100℃X3h |
10 |
10 |
12 |
10 |
8 |
|
|
1500℃X3h |
14 |
14 |
14 |
/ |
/ |
|
|
linear change rate, 1300℃x3h,% ± |
0.3 |
0.5 |
0.5 |
0.5 |
0.5 |
|
|
Continuous Service Temperature ℃ |
1500 |
1600 |
1450 |
1400 |
1350 |
|
|
Service Environment |
Ferrochrome Reduction Kiln;Sponge Iron Rotary Kiln |
Ferronickel Direct Reduction Rotary Kiln |
High- Temperature Zone of Ferronickel Pre-reduction Rotary Kiln; Ferromanganese Decomposition Kiln |
Ferromanganese Decomposition Kiln; Low-Temperature Zone of Ferronickel Pre-Reduction Kiln |
Vanadium Pentoxide Rotary Kiln |
|
General roasting rotary kiln:
Pyrometallurgical alumina ; Alumina extraction from high-alumina coal fly ash; Reduction roasting of limonite,siderite:
|
Item Mark No. |
LM-MA85 |
LM-GN15 |
LM-MS65 |
LM-MS45 |
LM-D35 |
|
|
AL2O3 % ≥ |
70 |
45 |
60 |
40 |
30 |
|
|
MgO(SiC) % ≥ |
15 |
/ |
(8) |
(8) |
||
|
Bulk Density(g/m3) |
2.85 |
2.30 |
2.55 |
2.40 |
2.20 |
|
|
Apparent Porosity % ≤ |
15 |
15 |
||||
|
Compressive Strength(MPa)≥ |
110℃X24h |
60 |
50 |
60 |
50 |
40 |
|
1100℃X3h |
80 |
70 |
60 |
60 |
||
|
1350℃X3h |
80 |
90 |
/ |
/ |
||
|
Modulus of Rupture(MPa)≥ |
110℃X24h |
6 |
8 |
8 |
6 |
6 |
|
1100℃X3h |
10 |
10 |
10 |
8 |
||
|
1350℃X3h |
12 |
12 |
/ |
/ |
||
|
Linear change rate, 1350℃x3h, % ± |
0.5 |
0.3 |
0.5 |
0.5 |
0.5 |
|
|
Operating environment and application range |
Rotary kiln for pyrometallurgical alumina calcination; Calcination section of the rotary kiln for alumina extraction from high-alumina fly ash |
Calcination Section of Pyrometallurgical Alumina Rotary Kiln; Low-temperature section for alumina extraction from high-alumina fly ash. |
Calcining zone of rotary kiln for reduction roasting of limonite, siderite, and pyrite |
Low-temperature zone of the rotary kiln for reduction and roasting of limonite, siderite, and pyrite |
kiln hood of a rotary kiln used for the reduction and roasting of limonite, siderite, and pyrite |
|
Solid Waste and Hazardous Waste Rotary Kiln:
Zinc Oxide Volatilization Kiln;Medical Hazardous Waste;Chemical Hazardous Waste; Municipal Sludge Drying:
|
Item Mark No. |
LM-GMC90 |
LM-GMA75 |
LM-TA70 |
LM-GM75 |
LM-GM65 |
LM-D50 |
|
|
AL2O3 % ≥ |
86 |
73 |
68 |
75 |
63 |
47 |
|
|
Cr2O3/MgO % ≥ |
5/ |
/20 |
/ |
5/ |
/ |
/ |
|
|
Bulk Density, (g/m3)±0.1 |
3.10 |
3.10 |
2.8 |
2.75 |
2.50 |
2.35 |
|
|
Compressive Strength (MPa)≥ |
110℃X24h |
50 |
50 |
80 |
80 |
60 |
60 |
|
1100℃X3h/ 1300℃X3h |
80/100 |
70/100 |
90/100 |
100/120 |
60/80 |
70/80 |
|
|
Modulus of Rupture(MPa)≥ |
110℃X24h |
6 |
8 |
8 |
12 |
6 |
6 |
|
1100℃X3h |
10 |
10 |
10 |
14 |
8 |
8 |
|
|
1350℃X3h |
14 |
12 |
12 |
14 |
12 |
10 |
|
|
Linear change rate ,1300℃x3h, % , ± |
0.3 |
0.5 |
0.5 |
0.5 |
0.5 |
0.5 |
|
|
Service Environment |
Hazardous Waste Kiln with Complex Acid-Alkali Atmosphere; Zinc Recovery Kiln for lead water slag and steelmaking dust mixture |
Alkaline Materials and Slightly Alkaline Salt Hazardous Waste Incineration Kiln |
Zinc volatilization kiln mainly using lead slag;Municipal sludge reduction and drying kiln;General solid waste treatment kiln |
Zinc volatilization kiln primarily using steelmaking dust;General chemical hazardous waste incineration kiln;Acidic material-based incineration kiln |
Municipal sludge drying treatment; Municipal sludge drying treatment; Medical hazardous waste treatment |
Municipal sludge drying treatment |
|
Monolithic refractories have gained extensive application in circulating fluidized bed (CFB) boilers due to their unique advantages, including integral structural integrity, ease of installation, and convenient maintenance. Their deployment in the boiler's most severe wear zones makes their performance quality a critical factor in determining whether the boiler can achieve long-term, full-capacity, and safe operation.Unshaped refractory materials can be classified into castables, plastic refractories, ramming materials, gunning materials, patching materials, etc., according to their different construction methods. Among these, castables are the most widely used type in circulating fluidized bed boilers, while plastic refractories and ramming materials are mainly used in areas where formwork vibration casting is difficult and in locations with thin linings.
Technical Specifications of Our Monolithic Refractory Materials:
|
Mark No. Item |
Brown corundum castable |
high-strength wear-resistant castables |
Brown corundum ramming material |
high alumina plastic refractory |
||
|
HF-160 |
HF-135 |
|||||
|
chemical components (%) |
AL2O3 ≥ |
80 |
75 |
65 |
80 |
75 |
|
Fe2O3 ≤ |
2.0 |
2.0 |
2.0 |
|||
|
Bulk Density(g/cm3) |
110℃×24h ≥ |
3.0 |
2.8 |
2.65 |
3.0 |
2.6 |
|
1000℃×3h ≥ |
2.9 |
2.75 |
2.60 |
2.9 |
2.5 |
|
|
Cold Modulus of Rupture (Mpa) |
110℃×24h ≥ |
10 |
9 |
8 |
8 |
8 |
|
1000℃×3h ≥ |
20 |
15 |
12 |
18 |
15 |
|
|
Cold Crushing Strength(Mpa) |
110℃×24h ≥ |
70 |
70 |
60 |
65 |
40 |
|
1000℃×3h ≥ |
150 |
120 |
100 |
125 |
90 |
|
|
Fired Linear Change(%)1000℃×3h |
0.1 |
-0.2 |
-0.3 |
0.2 |
0.3 |
|
|
Thermal shock resistance(次) ≥ |
30 |
25 |
25 |
25 |
20 |
|
|
Wear resistance(cm3)≤ |
5 |
4.5 |
6 |
6 |
9 |
|
|
Refractoriness(℃) ≥ |
1780 |
1770 |
1750 |
1780 |
1750 |
|
The product has the advantages of high temperature resistance, corrosion resistance, thermal shock resistance and convenient construction. It is a refractory mud used in hot repair of glass furnace.
|
Item |
silica hot repairing material |
silica seal material |
|
SiO2, ≥% |
95 |
95 |
|
Refractoriness , ≥℃ |
1700 |
1700 |
|
Apparent Porosity ,≤% |
22 |
21 |
|
Compressive strength, ≥Mpa |
30 |
20 |
|
Linear variation after heating,1400℃x2h% |
+0.3 |
+0.3 |
|
Item |
Zircon ramming mass |
|
|
ZS-60 |
ZS-63 |
|
|
ZrO2, ≥% |
60 |
63 |
|
Fe2O3, ≤% |
38 |
34 |
|
SiO2, ≤% |
0.3 |
0.3 |
|
Bulk Density, ≥g/cm³ |
3.4 |
3.5 |
|
Apparent Porosity ,≤% |
18 |
18 |
|
Compressive strength, ≥Mpa |
50 |
50 |
|
Item |
AZS refractory castable |
|
|
AZS-31 |
AZS-20 |
|
|
Al2O3, ≥% |
48 |
60 |
|
ZrO2, ≥% |
31 |
20 |
|
Fe2O3, ≤% |
17 |
14 |
|
SiO2, ≤% |
0.3 |
0.3 |
|
Bulk Density, ≥g/cm³ |
3.1 |
3.15 |
|
Apparent Porosity ,≤% |
18 |
18 |
|
Compressive strength, ≥Mpa |
50 |
50 |
High strength refractory castable
Fire clay motar,high alumina mortar,corundum motar mainly used for laying low porosity clay bricks, high aluminum bricks, mullite bricks, corundum mullite bricks and so on.
|
Item |
High strength refractory castable |
||
|
GQ-65 |
GQ-75 |
||
|
Al2O3, ≥% |
65 |
75 |
|
|
Bulk Density, ≥g/cm³ |
2.5 |
2.6 |
|
|
Compressive strength, ≥Mpa |
110℃x24h |
40 |
60 |
|
1300℃x3h |
60 |
80 |
|
|
Rupture strength,≥Mpa |
110℃x24h |
6 |
8 |
|
1300℃x3h |
8 |
10 |
|
|
Linear change on reheating,1300℃x3h |
±0.5 |
±0.5 |
|
|
Item |
Fire clay refractory mortar |
||
|
NN-38 |
NN-45 |
||
|
Al2O3, ≥% |
38 |
45 |
|
|
Refractoriness,℃ |
1600 |
1650 |
|
|
Cold rupture bond strength, ≥Mpa |
110℃ after drying |
1 |
1 |
|
1200℃x2h |
3 |
3 |
|
|
Item |
High alumina refractory mortar |
|||
|
LN-55 |
LN-65 |
LN-75 |
||
|
Al2O3, ≥% |
55 |
65 |
75 |
|
|
Refractoriness,℃ |
1700 |
1770 |
1750 |
|
|
Cold rupture bond strength, ≥Mpa |
110℃ after drying |
1 |
1 |
1 |
|
1200℃x2h |
4 |
4 |
4 |
|
|
Item |
Mullite refractory mortar |
Corundum refractory mortar |
||
|
MM-70 |
MM-80 |
MM-90 |
||
|
Al2O3, ≥% |
68 |
78 |
90 |
|
|
Refractoriness,℃ |
1790 |
1790 |
1800 |
|
|
Cold rupture bond strength, ≥Mpa |
110℃ after drying |
1 |
1 |
1 |
|
1200℃x2h |
4 |
4 |
3.5 |
|
|
Linear change on reheating,1300℃x3h |
+1~-3 |
+1~-3 |
+1~-3 |
|
Property and Advantages
Easy construction: Can be prepared and applied on site as required, forming a seamless lining that adapts to complex structures; suitable for repairing irregular furnace bodies and convenient for mechanized furnace building and maintenance.
Flexible design: Can be formed into any complex shape, adaptable to various furnace structures.
Excellent integrity: Seamless structure with high stability and good airtightness, effectively preventing penetration of molten metal and slag.
High production efficiency: No firing required, low energy consumption, and short production cycle.
Easy repair: Local damage can be repaired with the same material, saving time and cost.
Good thermal shock resistance: Without rigid structures, it can better absorb thermal stress and resist sudden temperature changes without cracking.
Strong anchoring: Combines firmly with metallic anchors to form a strong and solid lining.
Strong adaptability: Excellent resistance to thermal shock, mechanical impact, and molten metals, suitable for complex shapes and high-temperature environments.
Long service life: Good overall airtightness and low heat loss ensure longer service life.
Energy saving: Low heat capacity and low thermal conductivity contribute to energy conservation.
Our Company




Shandong Luming New Materials Technology Co., LTD covers an area of 62 acres(approx. 41,000㎡),offers end-to-end production solutions. We are fully equipped with facilities for raw material crushing and pulverizing, automated castable batching, precast block molding, tunnel drying, high-temperature shuttle kiln firing, and precision processing of both precast and fired products, ensuring we can fulfill the requirements of customers in any industry.
Our annual production capacity includes 60,000 metric tons of unshaped castables, 20,000 metric tons of rotary kiln precast shapes and unfired bricks, and 20,000 metric tons of products such as large glazed cast blocks for furnace doors, large bottom blocks for glass kilns, corundum-mullite and sillimanite products,etc.We have supporting raw material crushing and pulverizing production lines, along with complete raw material and finished product warehouses.Built in 2022, our new two-story warehouse features digitalized inbound/outbound management and serves as a smart warehouse demonstration project for Zibo City.
Our Main Products
1. Complete sets of refractory materials for various rotary kiln production lines in metallurgy, chemical, mining and other industries.
2. Low-cement castables, Cement-free castables, Self-flowing castables, Slag-resistant castables,Self-flowing Fast-drying Anti-explosion Castables, Fiber-Reinforced Castable Refractory, fiber Gunning Mix, fiber Plastic Refractories,Phosphate-bonded castables, PA-80 series castables, Trough mix (precast shapes),Magnesia-alumina spinel ladle castables,Aluminum-silicon carbide-carbon castable,Various gunning mixes, castables, and ramming mixes for blast furnaces and hot blast stoves.
3. Fireclay brick, High-alumina brick, Corundum brick, Mullite brick, Composite corundum-mullite brick, Composite sillimanite brick, Flame baffle brick / Fire barrier brick, Glazed brick for coke oven doors,Various machine-made unburned bricks,Ceramic honeycomb regenerator, Regenerative burner
As a Shandong Provincial Engineering Technology Center and a Wuhan University of Science and Technology Ph.D. Workstation, our company possesses 18 authorized invention patents, 23 utility model patents, and 1 world-class scientific achievement. We have participated in drafting 2 industry association standards and 1 national GB standard, and were among China's first batch of enterprises to achieve "Intellectual Property Management System Certification".
Our company has obtained the following certifications and qualifications:
CQC ISO9001 International Quality Management System Certification
ISO14001 Environmental Management System Certification
OHSAS18001 Occupational Health and Safety Management System Certification
Class II Metallurgical Engineering Contracting Qualification Certificate
Work Safety Permit
First "AAA"-Rated Credit Enterprise in China's Refractory Industry (Pioneer Recipient)
Our Quality Assurance Measures
Actively implement the ISO9001 quality management system standard, establish and continuously improve a quality assurance system to ensure its effective operation and continuous improvement, and provide users with reliable quality assurance.
Hold technical special meetings to analyze technical requirements, develop technical solutions, and formulate process technical operating procedures through laboratory research and development, all based on the different product requirements of various users.
For each project, a dedicated project manager is assigned to lead a quality accountability team. The functions and responsibilities of each member of this team are clearly defined.
We implement strict quality control for material procurement. We compare offers from multiple suppliers and select raw materials from reputable, high-quality large and medium-sized enterprises.
Strict process requirements are enforced to fully leverage our company's comprehensive and mature quality control points. Non-conforming products are strictly prohibited from proceeding to the next stage, thereby implementing quality control throughout the entire production process.
Utilizing our company's existing inspection methods, we conduct regular quality checks. We thoroughly analyze any issues found, inspect quality fluctuations, analyze quality trends, and research and formulate measures for quality improvement. This ensures that the process quality remains in a controlled state at all times.
The fully automatic production line ensures that every batch of products is manufactured under consistent production conditions, guaranteeing stable product quality without fluctuations.
Each product batch undergoes synchronous system sampling and is tested for various indicators according to customer requirements. Only after passing the tests is it packaged and shipped.
For the stacking, storage, transportation, and warehousing of refractory materials, our company will strictly comply with the relevant requirements of national standards.



Our After-Sales Service Commitment
We strictly adhere to all agreements signed with our clients and conscientiously accept the obligations therein.
We commit to delivering all supplied materials to the client's designated location within the specified timeframe. We also guarantee that all product physicochemical indicators will meet the buyer's requirements. If any material is found to be non-conforming upon inspection, we will unconditionally replace or refund it and bear all associated costs.
We will strictly comply with the technical requirements for all supplied products. Upon delivery, we will provide a genuine and credible "Product Quality Certificate," "Test Report," and "Product Usage Instructions." We are also willing to accept random sampling inspections of the products by the buyer.
During construction, our company will dispatch professional technical personnel to the site to provide on-site tracking and support. They will offer technical guidance on the construction, furnace baking, and trial operation of the materials, promptly addressing and resolving any related issues. They will also assist the construction team with product protection and other relevant tasks.
For kilns constructed by our company, we are willing to provide detailed furnace drying curves.
Should any quality issues arise during use, we commit to being on-site within 24 hours for domestic clients in the province and within 48 hours for those outside the province upon receiving notification. For international clients, a written response will be provided within 24 hours to assist in the investigation and analysis of the issues.
We commit to taking responsibility for any losses caused by defects in the goods provided during the warranty period.
Should a product fail due to improper use by the client during the warranty period, we will actively assist with replacement, charging only for the cost of the materials.
Even after the warranty period expires, our company will remain actively involved in assisting with the resolution of any issues that may arise.
Technical personnel will conduct regular quality feedback sessions to solicit suggestions for improvement and enhance service quality.
Hot Tags: unshaped refractory materials, China unshaped refractory materials manufacturers, suppliers, factory
